Reinforced Concrete Bonded Loose Hook End Steel Fiber

• Customization: Available
• Fire Resistance Level: High
• Form: Arc
• Model NO.: Steel fiber
• Production Method: Melting Method
• Temperature: ≤1000℃
• Type: Mullite Fiber
• Transport Package: Polybag
• Trademark: Shengjie
• Origin: China
• HS Code: 7326209000
• Production Capacity: 100000ton Per Year

Product Description

Steel fiberSteel, among which cut-type steel fibers are widely used and have high tensile strength. Cut steel fibers are produced using low carbon alloy as the base material and using cold drawing technology below the metal crystal temperature. It is widely used in the reinforcement of industrial floors (logistics, cold storage, outdoor, warehousing) and the improvement of cracking conditions. Fibers with an aspect ratio of 30 to 100 are made by cutting thin steel wires, shearing cold-rolled strip steel, milling steel ingots, or rapid condensation of molten steel. The properties of steel fibers are very different due to different production methods. For example, the tensile strength of cold-drawn steel wire is 380-3000MPa, the tensile strength of cold-rolled strip shearing method is 600-900MPa, and the steel ingot milling method is 700MPa; molten steel condensation Although the method is 380MPa, it is suitable for producing heat-resistant fibers. A thin steel wire of a certain length and diameter added to strengthen mortar or concrete. Commonly used long straight steel fibers with circular cross-sections have a length of 10 to 60 mm, a diameter of 0.2 to 0.6 mm, and an aspect ratio of 30 to 100. In order to increase the interfacial bonding between fiber and mortar or concrete, various special-shaped steel fibers can be used. The cross-sections are rectangular, zigzag, and meniscus; the cross-sectional dimensions alternate along the length; corrugated; circular; Those with enlarged ends or hooks, etc. In order to disperse the steel fibers evenly in the mortar or concrete and increase the aspect ratio of the fibers, steel fibers bonded together by water-soluble glue into bundles can be used. Steel fibers can be manufactured by cutting cold-drawn steel wires, shearing thin steel plates, milling steel blocks or steel ingots, and drawing yarn from molten steel. To prepare steel fiber concrete for normal temperature applications, low carbon steel fibers can be used; while to prepare fire-resistant steel fiber concrete, stainless steel fibers must be used. Adding an appropriate amount of steel fiber to mortar or concrete can improve its tensile and flexural strength, and greatly improve its toughness and impact strength.

Specification:
 

Product Name	Reduce material consumption waved ends steel fiber for Sprayed concrete ( Shotcreting ) in tunnels and mine
Material	Q195/Q235/Low carbon steel/Copper coated
Color	Copper
Standard	ASTM 820A; ISO 9001; YB/T151-1999; JG/T3064-1999
Grade	Q195/Q235/Stainless Steel/Low carbon steel/Copper coated/Galvanised
Shape	Hooked Ends; Waved Low Carbon Steel Fiber; Flat End Fibres; Crimped Steel Fibers; Continuous Deformed Steel Wire Fiber; Courrugrated/Milling Fibers etc.
Advantage	Result in more homogeneous mix in concrete Flexural strain capacity is enhanced Add ductility to concrete Control cracks Joint stability Narrow joint width Shear load transfer Fatigue and impact resistance Post crack ductility Reduce material consumption and save cost - on average a Steel Fibre slab will overall cost between 10-15% less than an equivalent mesh slab. Longer service life Quick & Easy Application: Steel Fibres can be added at the concrete plant or at the job site directly in to the back of the truck mixer. You can then pour pre-reinforced concrete.

Application:

1. For Flooring ,Industrial floors,Joint-less floors
Floors-on-piles,Lightly loaded floors,Liquid tight floors & composite metal decking

2. For Hard Standing & Heavy Duty,Parking lots,Playgrounds
Airport runways,Taxiways,Maintenance hangers,Access roads & workshops
Ports& Containers for port pavements,Container terminals
Bulk storage areas access roads,For tank movement

3. Tunnels
Shotcreting of tunnels , Concrete.


Package&shipping;

Company Profile:
Shengjie Refractory was established in 1998, located in Luoyang City, Henan Province. After more than 25 years of development, we have established 7 modern factories and have multipleexperienced R&D teams
Shengjie Refractory Materials is a company specializing in refractory products. lts main productsinclude amorphous refractory materials, refractory bricks, ceramic fiber products, etc.We have exported more than 100 countries like the Middle East, the United States, Europe.Africa, India, etc.

FAQ:
1.Are you a manufacturer or trader?
We are a manufacturer.

2.What's the MOQ?
No limit to the quantity. We can offer the best proposal and solutions according to your condition.

3.Why should you buy from us not from other suppliers?
*Professional manufacturer since 1998 *10 production lines *An annual output of nearly 100,000 tons and hundreds of employees *Customized according to your requirements or drawings *Inventory available for quick shipment

4.Do you provide free samples?
Yes,we can offer free sample if we have it in stock,but the express fee is to be collected.

5.How do you guarantee quality?
Before pre-production, we will produce a batch of samples for quality inspection; product quality will be checked again before delivery.

6.Can we visit your factory?
Yes, certainly.We sincerely welcome you to come to China and visit our factory.